『Flow Meter Rental: Short-Term Ultrasonic and Magnetic Leasing』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Flow Meter Rental: Short-Term Ultrasonic and Magnetic Leasing
Quick Answer: Silver Automation Instruments rents clamp-on ultrasonic and insertion magnetic flow meters for temporary use. Typical rental periods start from 7 days. You get factory-calibrated meters for pipeline commissioning, leak detection, pump testing, or seasonal water monitoring. Send us your pipe diameter (DN), fluid type, temperature, and pressure range to receive a same-day rental quote.
What the Rental Service Covers
We ship portable ultrasonic flow meters and insertion electromagnetic flow meters from stock. Both meter types work without cutting pipes or stopping processes. Clamp-on ultrasonic sensors mount directly on the pipe outside wall. Insertion mag meters need a hot-tap fitting or an existing ball valve saddle. You can measure flow from DN15 up to DN2000. Pipe materials include carbon steel, stainless steel, PVC, HDPE, and lined concrete. Rental kits include the transmitter, sensors, mounting straps, coupling gel, signal cables, and a printed calibration certificate.
Many customers rent meters for short site surveys. A water utility in the Philippines rented three clamp-on ultrasonic meters last month. They checked zone flow balance over a 14 day period. Our technical team configured the data logger to record flow rate every minute and total volume every hour. After the rental, the built-in 16 GB memory delivered raw CSV files the team analysed on their own.
When a Short-Term Rental Makes Sense
Here are five real scenarios we see repeatedly across Southeast Asia, Oceania, and the Middle East.
Pipeline commissioning. A Vietnamese EPC contractor needed to verify pump output before signing off on a firewater ring main. They could not install a permanent meter yet because the pipe still had construction debris. A clamp-on ultrasonic meter solved the problem in two hours. They returned the meter after 10 days and only paid the rental fee plus outbound freight.
Temporary bypass measurement. During a heat exchanger cleaning shutdown at a chemical plant in Indonesia, operations needed to route cooling water through a bypass line for 48 hours. An insertion magnetic meter on a rental hot-tap mount gave real-time flow data to avoid pump dead-heading.
Leak detection or NRW audits. A municipal water board in Kenya used two portable ultrasonic meters to log night flows in a district metered area. They identified a buried leak that had wasted 85 m3 per hour for months. The rental lasted 21 days and paid for itself within the first week after the leak was found.
Seasonal irrigation or dewatering. A mining contractor in Western Australia rents insertion mag meters every wet season. They need to report dewatering discharge volumes to the local water authority. They send us an email each November and we hold the same model for them until the rainy months end.
Production trial runs. A food additive producer in Thailand tested a new CIP system for two weeks. They used a rented magnetic meter to record final rinse water flow and prove cleaning consistency before buying permanent meters.
Ultrasonic Rental Models and Key Specs
Our most rented ultrasonic flow meter is the Silver AUT-1000P portable clamp-on kit. Transducers come in small, medium, and large sizes. Pipe size range covers DN15 to DN1200. Accuracy is plus or minus 1% of reading when the straight pipe run condition meets 10 upstream diameters and 5 downstream diameters. Fluids with less than 10,000 ppm total suspended solids work reliably. The transmitter accepts PT100 RTD inputs, so you get mass flow or energy flow when temperature difference matters. Output options include 4-20 mA, pulse, and Modbus RTU. The internal battery runs 24 hours at continuous data logging, and you can also power it with a standard 12 VDC supply on site.
We also rent the Silver AUT-2000P fixed-wall-clam
Magnetic Flow Meter Rental Options
For conductive liquids above 20 microsiemens per centimeter, we offer insertion electromagnetic meters. The sensor probe inserts through a 1.5 inch full-port ball valve. A single technician can install or remove the probe while the line stays pressurised up to 16 bar. The converter is the same magnetic flow transmitter we use on permanent models. It supports empty pipe detection, forward and reverse totalising, and HART protocol. Accuracy is 0.5% of reading from 0.3 m/s to 10 m/s flow velocity. We provide the insertion fitting, depth gauge, and a loop-powered display if needed.
In practice, most customers rent insertion mag meters for lines from DN200 to DN2000. Anything smaller is usually easier to handle with a clamp-on ultrasonic. But if the fluid has gas bubbles or is not sonically conductive (like some low-density slurries), the magnetic meter is the only rental option that gives stable readings.
Pricing, Logistics, and Deposit
We quote rental fees per week. Discounts start from the fourth week. Shipping out of our Singapore and China warehouses reaches most Asia-Pacific destinations within 3 to 5 working days. For urgent projects, we have kept a small stock in Perth and Dubai with partner logistics hubs. The rental contract includes a refundable security deposit based on the replacement value. Deposit is returned within five business days after the meter arrives back and passes our incoming inspection. We accept bank transfer and corporate credit card for the rental payment. Deposit invoices can be issued in USD, AUD, or EUR.
How to Request a Rental Quote
Tell us the fluid name, operating pressure in bar, temperature in degrees Celsius, pipe outer diameter or nominal bore (DN), and pipe wall thickness if you know it. Also mention the rental duration and the type of data output you need. In most cases, we reply with a final proposal within two hours during Asia business hours. Send your request to [email protected] or message us on WhatsApp at 86-135-12131526. WeChat users reach us at +86 13512131526. Phone support is available at +86-135-1213-1526.
Frequently Asked Questions
What is the minimum rental period?
Seven days. After that we charge by the week. If you need only 3 days, we still invoice the minimum 7 day rate because calibration checks and logistics take the same effort.
Do I need special training to use the rented meter?
No. We ship a quick-start guide and include a WhatsApp video call setup session. Most site electricians and commissioning engineers operate the flow transmitter within 30 minutes. The menu follows VDMA standard flow meter structure.
Can I rent for hazardous areas?
Yes. We have ATEX Zone 1 and IECEx certified clamp-on ultrasonic transducers for gas group IIC and temperature class T4. The insertion mag meter probe also has an ATEX option. We need the zone classification and gas group to provide the correct certified copy.
What happens if the meter gets damaged on site?
Ordinary wear is covered by the rental fee. If the transducer cable is crushed or the transmitter screen is smashed, the repair cost is deducted from the deposit. We share a repair cost table upfront so there are no surprises.
Which meter works for raw sewage flow measurement?
We typically recommend the insertion magnetic meter for raw sewage because the high solids and gas content can disrupt ultrasonic signals. The magnetic meter electrodes are designed for fouling-prone fluids and the insertion probe can be lifted and cleaned without draining the pipe.
Hot Product
Related AD
