Stainless steel gear flowmeter | DN25 pipeline elliptical gear flowmeter

『Stainless steel gear flowmeter』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)

1. Daniel waist wheel flowmeter ™ Working principle and technical parameters of LQ 4 "Ansi 600- Baidu ..

Daniel waist wheel flowmeter Daniel ™ The working principle of LQ 4 "ANSI 600 is to use the pressure difference between the inlet and outlet to drive the waist wheel to rotate, and to measure the liquid flow rate through the gear linkage of the Shi Qinghe counting mechanism. 1. Working principle: When the liquid flows through the flowmeter, the pressure difference formed at the inlet and outlet will push a pair of waist wheels to rotate. The drive gear fixed on the shaft ensures that the two waist wheels rotate continuously alternately, continuously discharging the liquid from the measuring chamber. The volume of liquid discharged by each pair of waist wheels rotating once is four times the volume of the measuring chamber. This rotational motion is transmitted to the counter through a sealed coupling and reduction mechanism, thereby displaying instantaneous and cumulative flow rates. After installing the transmitter, remote data transmission and automation control with external display instruments or control systems can be achieved. 2. Technical parameters: As the complete parameters of this model are not provided in public information, the following are reference values based on the general technical specifications of the waist wheel flowmeter: • nominal diameter: 4 inches (DN100) • pressure rating: ANSI 600 (corresponding to a nominal pressure of about 10.0MPa) Working temperature: -10 ℃~60 ℃ (actual range subject to the manufacturers manual) • Accuracy level: Typical value is ± 0.5% or higher (depending on the medium and working conditions) • Material combination: usually includes cast iron, stainless

2. What is the measurement method of elliptical gear flowmeter? The elliptical gear flowmeter is a volumetric flowmeter, also known as a displacement flowmeter. It is a type of flow meter with high measurement accuracy in the Ziyou Instrument series. When the measured liquid enters the elliptical gear flowmeter through the pipeline, the pressure difference generated at the inlet and outlet drives a pair of gears to rotate continuously, continuously delivering the liquid measured by the lunar cavity to the outlet. The product of the number of revolutions of the elliptical gear and four times the displacement per time is the total flow rate of the measured liquid. Therefore, it is not difficult to find from the measurement principle of the elliptical gear flowmeter that it relies on the pressure head of the measured medium to push the elliptical gear to rotate for measurement, regardless of the flow state of the fluid. Through the above introduction, we have found that this flowmeter belongs to the mechanical principle instrument and can only be used for measuring high viscosity liquid media. The elliptical gear flowmeter uses mechanical measuring eleme

『SILVER Official Website SERVICE』